-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
Steel IBC Spill Containment Pallet
PAK993
Write a Review
Holds (2) IBCs, 51" x 99" x 23", 400 gal. Sump Capacity
Store IBC tanks containing lubricants, solvents or flammables on these groundable steel units.
Read More
PRICING (Based on quantity)
| 1+ |
|---|
|
$1,989.00
|
Description
Store IBC tanks containing lubricants, solvents or flammables on these groundable steel units.
- Long-lasting, heavy-gauge steel provides years of service
- Steel grating lifts out for easy access to sump
- Removable shelving holds pails during filling and reduces the chance of spills
- Ideal for storing oils, lubricants, solvents and flammables; grounding bolt included
- Removable drain plug makes it easy to empty sump
- Deck holds two 350-gallon IBCs side by side
- Large-capacity, shared sump helps you comply with containment regulations
Specifications
| Holds | (2) IBCs |
| Color | Gray |
| Dimensions | 51" W x 99" L x 23" H |
| Load Capacity UDL | 10000 lbs. |
| Sump Capacity | 400 gal. |
| Double-Stackable Unit | No |
| Drain | Includes Drain |
| Fork Truck Access | Two-Way Fork Access, Move Unloaded Only |
| Grates | (4) 51" L x 24.75" W Grates |
| Use With Flammables | Yes |
| Sold as | 1 each |
| Weight | 702 lbs. |
| Composition | 12 Gauge Powder-Coated Steel |
| UNSPSC | 24101905 |
| Pigalog® Page Number | Page 386 |
Reviews
Additional Information
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
